Atlas Specs & Modifications

Dimensions - Two Containers (Stacked)

EXTERIOR LENGTH: 40’
EXTERIOR HEIGHT: 16’
EXTERIOR WIDTH:  8’

FIRST FLOOR:
INTERIOR LENGTH: 38.875’
INTERIOR HEIGHT: 7.875’
INTERIOR WIDTH: 7.16’

SECOND FLOOR:
INTERIOR LENGTH: 18.875’
INTERIOR HEIGHT: 7.875’
INTERIOR WIDTH: 7.16’

WEIGHT: ~22,500LBS (1 - 40’ CONTAINER FINISHED + 1 -20’ CONTAINER FINISHED)

Atlas Model First Floor Top View Rendering
Atlas Model Second Story Top View

Container Types Utilized:

LEVEL 1: 1 TRIP 40’ X 8’ X 8’ ISO CONTAINER
LEVEL 2: 1 TRIP 20’ X 8’ X 8’ ISO CONTAINER

Side walls
14-gauge vertically continuous corrugated steel panels.
Roof
14-gauge die-stamped steel sheets.
Cross Section
18x 8-gauge pressed channel section steel.
Corner Castings
Cast steel corner castings produced according to ISO 1161:1984. Castings can be used to lift and move the container during the setting period of the build. As well as locking the container into its foundation.
Cargo Doors
Original 11-gauge corten steel double outswing doors with 270° swing radius.
Rails
7-gauge tubular, cold-formed channel section steel.
Corner Posts
4-gauge single piece, pressed open section steel.
Subfloor
1” marine grade plywood
Foundation Lockdown
ISO container slab level lock type 4 welded to an 8” embedment plate with ¾” x 5” nelson studs.

EXTERIOR: SHERWIN WILLIAMS: DTM METAL ACRYLIC BONDING PRIMER

DIRECT TO METAL WATER-BASED ACRYLIC BONDING PRIMER APPLIED TO THE EXTERIOR OF THE CONTAINER AS A PROTECTIVE COATING TO MAINTAIN LONG LIFE OF THE CONTAINER.

SHERWIN WILLIAMS: EXTERIOR GRADE MULTI-ACRYLIC PAINT – MULTIPLE COLORS AND FINISHES AVAILABLE.

INTERIOR: SHERWIN WILLIAMS: PRO MAR 200 ZERO VOC LATEX PAINT

COMPLIES WITH LEED, MPI, GREEN GUARD, ENVIRONMENTAL INSTITUTE (GEI) AND OTHER GREEN GUIDELINES AND REGULATIONS. ANTI-MICROBIAL AGENTS INHIBIT THE GROWTH OF MOLD AND MILDEW ON THE PAINT SURFACE.

EXTERIOR WINDOWS:

VINYL SINGLE HUNG WELD IN WINDOW: HIGH PERFORMANCE LOW-E + ARGON GAS FILLED INSULATED GLASS FOR HEIGHTENED THERMAL ENERGY EFFICIENCY WITH FOUR-POINT WELDED VINYL MAIN FRAME ATTACHED TO STEEL FRAMING.

EXTERIOR DOORS:

CLEAR LOW-E GLASS BRICK MOLD, DOUBLE PANEDOORS ATTACHED TO STEEL FRAMING.

INTERIOR DOORS:

36” X 80” BARN DOOR – 0.25” X 4’ X 8’POPLAR SANDED PLYWOOD TRIMMED WITH 1”X 4” PINE ATTACHED BY SLIDING TRACK HARDWARE KIT

36” X 80” 6 PANEL HOLLOW CORE MOLDED COMPOSITE SINGLE PRE-HUNG INTERIOR DOOR

INTERIOR FRAMING: 2”X4” WOOD FRAMED STUD WALLS THROUGHOUT UNIT.

INSULATION: ASTM C518 R VALUE

CEILING / FLOOR: R-22 CLOSED CELL FOAMINSULATION
2-COMPONENT POLY/ISO CLOSED-CELL POLYURETHANE SPRAY FOAM.

WALLS: R-15 FACED BATT INSULATION FIBERGLASS BATT INSULATION, GREEN GUARD GOLD CERTIFIED

WALL SYSTEMS:

FINISH LEVEL:
 LEVEL 4

DRYWALL TYPE 1: 0.5” FIRE RESISTANT GYPSUM BOARD; 0.5”.

DRYWALL TYPE 2: 0.5” WATER RESISTANT GYPSUM BOARD.

FLOORING: LAMINATE FLOORING - WATERPROOF FOR 24 HOURS; 10 MM TOTAL THICKNESS INCLUDING FOAM BACKER AND VAPOR BARRIER.

 

BATHROOM:
24” VANITY WITH STAINLESS STEEL BOWL SINGLE LEVER HANDLE LAVATORY FAUCET
30”X 60” ACRYLIC ALCOVE SHOWER
ERGONOMIC TOILET 1.6 GPM
40 CFM EXHAUST FAN, UL LISTED AND HVI-2100 CERTIFIED.

KITCHEN:
FIXTURES:
25”X 22” SINGLE HOLE STAINLESS STEEL SINK WITH PULL DOWN SINGLE LEVER SINGLE MOUNT FAUCET.

CABINET / COUNTERTOPS:
1” BUTCHER BLOCK COUNTERTOP
24" WALL CABINET
30"X12" WALL CABINET
12" DOUBLE DOOR WALL CABINET
12" BASE CABINET
24" BASE CABINET
30" BASE CABINET
36" BASE CABINET
30" WALL CABINET GRAY (WATER HEATER)
30”X 60” KITCHEN ISLAND (AVAILABLE IN LOGGIA MODEL)

KITCHEN:
9.8-CU FT TOP-FREEZER REFRIGERATOR
1.6CU FT. OVER THE RANGE MICROWAVE DROP-IN
4 BURNER ELECTRIC COOKTOP 24 INCH ELECTRIC RADIANT COOKTOP

HVAC:
18,000 BTU MINI-SPLIT UNIT WITH AN ENERGY EFFICIENT 22 SEER RATING DUAL SPLIT, WALL MOUNTED, WITH REMOTE CONTROL AND WIFI CONTROL.

WATER HEATER:
ELECTRIC TANKLESS WATER HEATER 220V
99.8% ENERGY EFFICIENT, TANKLESS, COMPACT DESIGN WITH DIGITAL TEMPERATURE CONTROL IN INCREMENTS OF 1° F RANGING FROM 80° F TO 140° F.

WATER PRESSURE RATING: 50 PSI (MAX 80 PSI)

WATER PIPING: HIGH-DENSITY CROSS-LINKED POLYETHYLENE (HDPE) PEX PIPING

WASTE PIPING: HIGHLY-DURABLE SCHEDULE-40 PVC PIPING

WASTE OPENINGS: 2 (STEMMED DOWN THROUGH FLOOR)

VENT OPENINGS: 3 (STEMMED DOWN THROUGH FLOOR)

WATER INTAKE PORT: 1 (STEMMED DOWN THROUGH FLOOR)

SHUT OFF-VALVES: AT ALL FIXTURES

PLUMBING TESTING:

WATER SUPPLY PRESSURE TEST - IPC 312.5  

WATER TIGHTNESS TEST - IRC P2503.5.2  

TESTING OF BACK FLOW PREVENTION ASSEMBLIES- IPC 312.9  

DWV SYSTEM TEST - IPC 312.2 AND 312.3  

WINDOW LEAK TEST - INTERNAL STANDARD 8.6.2

200 AMP LOAD SYSTEM: 20-SPACE, 40-CIRCUIT OUTDOOR MAIN BREAKER PLUG-ON NEUTRAL LOAD CENTER.

HARDWIRED SMOKE AND CARBON MONOXIDE DETECTORS: PHOTO ELECTRIC SMOKE SENSOR AND CARBON MONOXIDE DETECTORS. TAMPER-RESISTANT WITH 9V BACKUP BATTERY.

CEILING LIGHTS: 6" SLIM RECESSED LIGHTING WITH JUNCTION BOX

EXTERIOR LIGHTS: EXTERIOR LED WALL SCONCE LIGHT

EXTERIOR: DUPLEX RECEPTACLE: WEATHER RESISTANT OUTDOOR 20 AMP 125 VOLT SELF GROUNDING OUTLET

INTERIOR DUPLEX RECEPTACLE OUTLETS: 15 AMP, 125 VOLT TAMPER RESISTANT OUTLETS.

INTERIOR DUPLEX GFCI RECEPTACLE OUTLETS: 15 AMP, 125 VOLT TAMPER RESISTANT OUTLETS.

RANGE RECEPTACLE: WALL MOUNTED, 50 AMP, 125/250 VOLT, NEMA 14-50R.

REFRIGERATOR RECEPTACLE: WALL MOUNTED, 15 AMP, 125 VOLT.

TELEVISION/DATA JACKS: CATEGORY 5E JACK FOR ETHERNET, INTERNET, PHONE. UL LISTED 2.4 GHZ PLATED JACK FOR A/V COMPONENTS, FROM STANDARD TV TO SATELLITE TV.

ELECTRICAL TESTING:
DIELECTRIC TEST - NEC 550.17 A
CONTINUITY TEST NEC 550.17 B
POLARITY TEST NEC 550.17 B
ELECTRICAL OPERATIONAL TEST NEC 550.17 B